The Surface Of The Paper Is Dirty; The Back Side Of The Paper Is Dirty - Canon imagePROGRAF iPF9000S User Manual

Problems with the printing quality

The surface of the paper is dirty

The Paper Retainer is soiled.
You are using a paper that does not dry easily.

The back side of the paper is dirty

The Platen has become dirty after borderless printing
or printing on small paper.
The Platen has become soiled due to printing on the
Platen because width detection is deactivated.
The Paper Retainer is soiled.
768 Troubleshooting
Cause
Cause
Corrective Action
Clean the Paper Retainer.
(→P.741)
Specify a time of about a minute in Roll DryingTime.
Corrective Action
Open the Top Cover and clean the Platen.
(→P.741)
Set CarriageScanWdth to Fixed.
Activate width detection, and open the Top Cover and
clean the Platen.
(→P.741)
Clean the Paper Retainer.
(→P.741)