Loading And Printing On Rolls - Canon imagePROGRAF iPF9000S User Manual

Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
•
If you are not using the Media Take-up Unit, spread a clean cloth or paper on the oor before printing
long documents such as banners. Otherwise, use the optional Output Stacker. (→P.156)
The printing may become dirty by touching the oor, when the long sheet is printed.
•
If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and cut the paper manually. (→P.138)
1.
Turn the printer on. (→P.26)
2.
Select a roll as the paper source. (→P.123)
3.
Set a roll on the Roll Holder. (→P.116)
84 Basic Printing Workow