Handlebar Position; Adjusting The Handlebar Position - KTM 1190 Adventure Owner's Manual

8 ERGONOMICS
8.2

Handlebar position

8.3

Adjusting the handlebar position

Warning
Danger of accidents Handlebar breakage.
–
If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handlebar.
The holes on the handlebar support are placed at a distance of
Hole distance
The handlebar can be mounted in two different positions. In this way, the handlebar can be
mounted in the position that is most comfortable for the rider.
401666-11
–
Remove screws
one side.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar supports in the required position. Mount and tighten screws
308080-01
3.5 mm (0.138 in)

 . Remove the handlebar clamps. Remove the handlebar and lay it to

. Take off the handlebar supports.
72

from the center.

.