Cub Cadet Tank LZ Operator's Manual page 38

Changing the Spindle Assembly
1. Remove the deck as instructed in the Deck Removal section.
2. Jack up the front of the mowing deck about one foot and
block it in that position.
3. Remove the deck cover.
4. Remove the drive belts. (See Replacing the Deck belt.)
5. Remove the blade. (See Replacing the Blades)
6. Using a 9⁄16 wrench or socket ratchet remove the flange
lock nuts, and the hex flange bolts. Remove the spindle
assembly. See Figure 6-11.
Hex Screw
Spacer
Flange
Lock Nut
Support Plate
Spindle
Assembly
Hex Flange Bolt
Spacer
Blade
Flange
Lock Nut
7. Reverse the process to install the spindle assembly.
Changing the Transmission Drive Belt
Several components must be removed and special tools used in
order to change the tractor's transmission drive belt. See your
Cub Cadet dealer to have the transmission drive belt replaced.
Tractor Creeping
Creeping is the slight forward or backward movement of the
mower when the throttle is on and the speed control levers are
in the neutral position. If your mower creeps, see an authorized
service dealer.
38 S 7— S
ection ervice
Figure 6-11