Table of Contents
Advertisement
STARTING THE ENGINE
When the boat is mounted with the
two outboard motors, perform the
above procedure on the right and left
outboard motors respectively.
54
COOLING WATER CHECK HOLE
COOLING WATER INTAKE PORT
(each side)
4. After starting, check whether the
cooling water is flowing out of the
cooling water check hole. Amount
of water flowing out of the check
hole might vary due to the
thermostat operation, but this is
normal.
If water does not flow out, or if
steam comes out, stop the engine.
Check to see if the screen in the
cooling water intake port is
obstructed and remove foreign
materials if necessary. Check the
cooling water check hole for
clogging. If water still does not flow
out, have your outboard motor
checked by an authorized Honda
outboard motor dealer. Do not
operate the engine until the
problem has been corrected.
Hide quick links:
Advertisement
Table of Contents
