Alarm Rec Set; Schedule Rec Set - Sylvania SY17TD8144-A Instruction Manual

REC SPEED [60] IPS Select the images per second (IPS) that the unit will record. Note
:
REC SELECT : CH1 – CH4 Each channel may be enabled/disabled from recording using this
HDD CLEAR
:
ALL
HDD :
OVERWRITE
HDD SLAVE
:

9. ALARM REC SET

ALARM REC :
REC QUALITY [BEST
:
REC SPEED : [60] IPS Select the images per second (IPS) that the unit will record when
REC
:
DURATION

10. SCHEDULE REC SET

SCHEDULE REC :
[DAILY] - Recording will be carried out according to time in a daily. Date will be
disregarded.
[OFF] - No schedule.
[ONCE] - Recording will be carried out according to the schedule.
11. TFT SET –
Adjust the monitor's Contrast, Brightness. You will see this menu on your camera
setting rather than on a blue background, enabling you to see the
changes being made to the picture.
that this is an overall value and is split between the active cameras.
Example – 60 IPS / 4 (cameras) = 15 IPS per camera
option.
[N] The HDD may be cleared of all data in this section. Press ENTER to
change to [MASTER], and then press the RIGHT button to select
Yes to erase.
[N] This option selects whether the unit will begin overwriting old
information when the HDD fills, or stop recording when the HDD is
full.
[N] Select [Y] is connecting an external slave drive.
[N] Select whether the DVR will begin recording upon an alarm event.
Alarm events include the external activation and or motion detection.
Select the quality setting to be used for alarm recording – [LOW],
[NORMAL], [HIGH], or [BEST]
activated. Note that this is an overall value and is split between the
active cameras. Example – 60 IPS / 4 (cameras) = 15 IPS per
camera
[N] Select the record duration to be used when an alarm is detected.
Valid entries include – 1/5/15/30 MIN, 1Hr, and Continuous.
SCHEDULE REC : [ OFF ]
N0 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
N1 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
N2 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
N3 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
N4 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
N5 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
N6 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
N7 : _ _ / _ _ _ _ : _ _ -> _ _ / _ _ _ _ : _ _
RETURN
EXIT
[SCHEDULE REC SET ]
: { J ]
: { J ]