Table of Contents
Advertisement
Installation
1. The monitor comes with both a desk mount stand and rack mount ears. If using the
desk mount, secure the mount to the bottom of the monitor using the screws
provided (Fig 1.0). If rack mounting, secure the rack mount ears to each side of the
monitor using the included screws (Fig 1.1).
2. Make the appropriate video connections.
I. BNC Inputs – Connect the desired cameras to the BNC video inputs.
II. VGA Input – If wishing to use the monitor to view the video signal from a PC,
connect the cable from a PC video card to the input labeled VGA In.
3. If using audio, connect the RCA audio cable to the desired channel. Each channel
also provides an RCA Audio Out connector.
4. Plug the power cord into a nearby power outlet. Note that there is also a main power
toggle switch on the side of the monitor.
Figure 1.0
Figure 1.1
Advertisement
Table of Contents
