Attaching A Single Pump To An Adapter Plate - Omega Engineering OMEGAFLEX FPU500 User Manual

3
Setting Up the Pump(s)

3.3.3 Attaching a Single Pump to an Adapter Plate

Refer to Figures 3-8 through 3-11 and Figure C.
ALIGNMENT PINS
MOTOR SHAFT
THREADED
HOLES
TO MOUNT
ADAPTER
PLATE TO
VENDOR
MOTOR (4X)
ALIGNMENT
PINS FOR
PUMP (2X)
Figure 3-8. Mounting the Adapter Plate
TOP ALIGNMENT
PIN
FACE OF
MOTOR
BOTTOM
ALIGNMENT PIN
ROTOR SHAFT
FLAT HEAD
SCREWDRIVER
Figure 3-10. Aligning the Pump
3-6
MOUNTING
HOLES
VENDOR
MOTOR
ADAPTER PLATE
CLEARANCE HOLES
FOR VENDOR MOTOR
ALIGNMENT PINS (2X)
MOUNTING
HOLES
ADAPTER
PLATE
with the Plate
Figure 3-9. Pump in Closed Position
STANDARD
MOUNTING
SCREWS
Figure 3-11. Securing the Pump to
the Plate