Canon MG7100 series Online Manual page 28

3. Set the stapling side
For Two-Sided, select either Long-Edge binding or Short-Edge binding.
4. Select Margin from the pop-up menu on the Print Dialog
5. Set the stapling margin
If necessary, set the Margin width, and to change the Stapling Side, select a setting
from the list.
Note
Depending on the Two-Sided setting in the Layout pop-up menu, the Stapling
Side that can be selected differs.
6. Complete the setup
Click Print.
When you execute print, duplex printing will be started.
Important
When a media type other than Plain Paper, Hagaki A, or Hagaki is selected from
Media Type menu of Quality & Media, duplex printing cannot be executed.
When borderless printing is set, duplex printing cannot be executed.
Duplex printing can be performed only when one of the following paper sizes is
selected from Paper Size.
• US Letter, A5, A4, JIS B5 (B5 JIS), Postcard
After printing the front page, there is an ink drying wait time before starting to print the
back page (Operation stops temporarily). Do not touch the paper during this time. You
28