Making Copies - Canon MG7100 series Online Manual

Making Copies

Load the original on the platen glass to copy.
This section describes the procedure to copy with Copy.
1. Make sure that the machine is turned on.
2. Load paper.
3. Flick the HOME screen, then tap
Using the Operation Panel
The Copy standby screen is displayed.
4. Load the original on the platen glass.
5. Specify the settings as necessary.
A. The copy layout is displayed.
Switch the layout (single-sided/2-on-1/two-sided).
B. Tap to specify the number of copies.
1. Flick to specify the number of copies.
2. Tap to specify the number of copies.
If you keep touching here, the number scrolls by 10.
Copy.
139