Getting Started - Alcatel HERO 2 8030 Y Quick Start Manual

1�2

Getting started

1�2�1 Set-up
Inserting and removing the SIM card
You must insert your SIM card to make phone calls. You do not need
to power off your phone before inserting or removing the SIM card
as this phone can support hot swap.
Installing&Removing SIM card
Before you install or remove the SIM card, use a pin to press the small
cavity until the SIM cassette pops out.
Your phone only supports micro-SIM card. Do not attempt to
insert other SIM types like mini and nano cards, otherwise
you may damage your phone.
Installing and removing the microSD card
Installing&Removing microSD card
Insert the external microSD card into the slot with the gold contact
facing down until it's locked. To remove the external microSD card,
gently push it until it's unlocked.
6
Hero 2_8030Y_QG_GB_140901.indd 6-7
Inserting or removing the stylus
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
To reduce energy wastage, disconnect your charger from
the plug when the battery is fully charged.
To reduce your phone's power consumption, switch off
Wi-Fi, GPS, Bluetooth or apps running in the background
when not needed. In Settings you can also lower the
brightness of the screen, and shorten the length of time
before the screen goes to sleep.
1�2�2 Power on your phone
Hold down the Power key until the phone powers on. It will take a
few seconds before the screen lights up.
Set up your phone for the first time
The first time you power on the phone, you should set the following
options: language, date & time, Google account, etc.
1�2�3 Power off your phone
Hold down the Power key from the Home screen until the Phone
options appear, select Power off.
7
2014/9/1 17:49:03