Samsung SCC-C4207P Owner's Instructions Manual page 10

(IRIS/ALC)
BLC BOTTOM...
LEVEL (0) ----I----
RET
For items in the BLC menu, the user can set the size and location of
the BLC area by pressing [ENTER] key after put the cursor on
USER... using the [Left, Right] key. For SIZE items, you can use the
[Up, Down, Left, Right] key to designate the SIZE, and then press the
[ENTER] key. You can set the location for areas using the [Up, Down,
Left, Right] key in the LOCATION.
(IRIS/ALC)
BLC USER...
LEVEL (0) ----I----
RET
SIZE
LOCATION
Use [Left, Right] key in the LEVEL menu to control the video
output level(brightness).
17
Press the
ENTER
button.
SIZE
Press the
ENTER
button.
LOCATION
SIZE
Press the
ENTER
button.
LOCATION
✔
WDR
WDR(Wide Dynamic Range) enlarges the advantage of a
screen, mostly effective photographing both indoor and
outdoor subjects simultaneously. In short, both subjects
can be distinctly revived. Select WDR... and press
[ENTER] to set up WDR LEVEL and FLICKERLESS.
CAMERA ID OFF
IRIS WDR...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE ONEAF
Press the
MOTION DET OFF
ENTER
COLOR/BW COLOR...
PRIVACY OFF
button.
SPECIAL ...
PRESET ...
EXIT QUIT
- LEVEL 1 : Controls the shutter speed while WDR
operates.
- LEVEL 2 : Controls the whole brightness while WDR
operates.
- FLIKERLESS : This is for preventing flicker on the
screen when NTSC system is used in 50HZ power
supply region and PAL system is used in 60HZ power
supply region. That is to prevent shaking on the screen
resulted from the discordance of the vertical sync
frequency and the flicker frequency of the illumination.
While this menu is ON, the electronic shutter is fixed to
1/100sec (NTSC) or 1/120 sec (PAL).
(IRIS/WDR)
E
LEVEL1 L --- I --- H
LEVEL2 L --- I --- H
FLICKERLESS OFF
RET
18