Stitch Width Dial; Presser Foot Pressure Adjustment Dial; Reverse Sewing Lever; Drop Feed Dog Lever - Baby Lock Jazz BLMJZ Instruction And Reference Manual

Stitch Width Dial

The numbers marked on the dial represent the stitch
width. THE HIGHER THE NUMBER, THE WIDER THE STITCH.
0
When the Straight or Triple Stretch Stitch is selected,
the needle position can be changed from right to left
by adjusting the stitch width dial.
Presser Foot Pressure
Adjustment Dial
You can adjust the presser foot pressure (the
amount of pressure applied to the fabric with the
presser foot)by adjusting the Presser Foot Pressure
Adjustment Dial. The higher the number, the greater
the pressure will be. Set the pressure at "2" for
normal sewing.

Drop Feed Dog Lever

The feed dog should be up for all general sewing.
Lower the feed dog for free motion darning,
embroidery, monogramming and stipple quilting.
When the feed dog is lowered, you must move the
fabric as you sew.
1
To lower the feed dog, slide flat bed attachment toward left
and then the lever to the left.
2
To raise the feed dog, slide the lever to the right.
7
Stitch Width Dial
1

Reverse Sewing Lever

You can use reverse sewing for back tacking and
reinforcing seams.
To sew in reverse, push the reverse sewing lever
down as far as possible and hold it in that position
while you lightly push the foot controller. To sew
forward, release the reverse sewing lever. The
machine will then sew forward.
Note: Feed dog will raise once a stitch is
-15-
1
1
Reverse Sewing Lever
1
1 2
completed or by turning handwheel
toward you.