Safety Information A1 - Omega Engineering CN9400 User Manual

INSTALLATION
Designed for use:
UL873 - only in products where the acceptability is determined by
Underwriters Laboratories Inc.
EN61010-1 / CSA 22.2 No 1010.1 - 92
To offer a minimum of Basic Insulation only.
Suitable for installation within Catagory II and III and Pollution
Degree 2.
SEE ELECTRICAL INSTALLATION P29 & P30
It is the responsibility of the installation engineer to ensure this
equipment is installed as specified in this manual and is in
compliance with appropriate wiring regulations.
CONFIGURATION
All functions are front selectable, it is the responsibility of the
installing engineer to ensure that the configuration is safe. Use the
program lock to protect critical functions from tampering.
SAFETY INFORMATION
ULTIMATE SAFETY ALARMS
Do not use SP2 as the sole alarm where personal injury or damage
may be caused by equipment failure.
A1