Output Options - Omega Engineering CN9400 User Manual

FACTORY SET OUTPUT OPTIONS
DUAL RELAY OR DUAL SSd OUTPUT MODELS
The table below details the factory set output options. rLY2 is a 1A
electromechanical relay, and SSd1/SSd2 is an identical second SSR
drive output.
Product
Code
CN9411
CN9422
QUICK START (page 1a) or SET-UP (page 5) follow steps 1
and 2 ignore step 3 and proceed straight to step 4.
22
Terminals
3 4 5
rLY1 (2A) rLY2 (1A)
SSd1 SSd2
(+) (-) (+)
Factory Options CN9411 and CN9422 pre-allocate SP1 to
terminals 3 and 4.
Note: Output device rLY/rLY1 is rated 2A
Output device rLY2 is rated 1A
Factory Option CN9411 offers the ability to change the allocation of
SP1 to terminals 5 and 6.
To make this selection during the initial configuration in either
6
QUICK START (page 1b) or SET-UP (page 5), start from step 3.
3 TO SELECT SP1
From the display
press and hold
to display rLY2 in the lower display.
(-)
(Main setpoint output device)
button then press the once
SP1D
RLY1