Summary Of Reports And Lists - Canon PIXMA MX310 series Quick Start Manual

Summary of Reports and Lists
The table below shows the reports and lists that can be printed from the machine. Refer to the pages
indicated for more details.
RePort Or List
0;
D/itscriptic:>fl,Ji;cf"ii
lm.
iii~
!i¥
,Ii
,jj;
\)2;
Activity report
Shows recent fax transactions performed by your machine.
See "Activity Report" on page 57.
Coded speed dial list
Lists the numbers and names registered for coded speed dialing.
See "Printing a List of the Registered Destination" on page 40.
User's data list Lists the current settings of the machine and the registered
sender information.
See "User's Data List" on page 58.
Memory list Lists the documents currently stored in the machine's memory.
See "Document Stored in Memory" on page 54.
TX (Transmission) report Confirms whether a transmission was completed successfully. If
enabled, prints after each fax transmission.
See "TX Report" on page 58.
RX (Reception) report Confirms whether a recepiion was completed successfully. If
enabled, prints after each fax reception. See "RX Report" on
page 58.
• Activity Report
Prints the history of sent and received faxes. The machine is factory-set to print an Activity report
after every 20 transactions. You can also disable automatic printing of this report, or print it
manually.
~
Note
For details on the Activity report setting, refer to "ACTIVITY REPORT" in "FAX SETTINGS" of the
User's Guide on-screen manual.
• Printing the Activity Report Manually
1
Press the
FAX
button, then press the
Menu
button.
2
Press the • or • button to select PRNT REPORT/LIST, then press the OK button.
3
Press the. or • button to select ACTIVITY REPORT, then press the OK button.
The Activity report is printed.
Faxing 57
Summary of Reports and Lists
The table below shows the reports and lists that can be printed from the machine. Refer to the pages
indicated for more details.
RePort Or List
0;
D/itscriptic:>fl,Ji;cf"ii
lm.
iii~
!i¥
,Ii
,jj;
\)2;
Activity report
Shows recent fax transactions performed by your machine.
See "Activity Report" on page 57.
Coded speed dial list
Lists the numbers and names registered for coded speed dialing.
See "Printing a List of the Registered Destination" on page 40.
User's data list Lists the current settings of the machine and the registered
sender information.
See "User's Data List" on page 58.
Memory list Lists the documents currently stored in the machine's memory.
See "Document Stored in Memory" on page 54.
TX (Transmission) report Confirms whether a transmission was completed successfully. If
enabled, prints after each fax transmission.
See "TX Report" on page 58.
RX (Reception) report Confirms whether a recepiion was completed successfully. If
enabled, prints after each fax reception. See "RX Report" on
page 58.
• Activity Report
Prints the history of sent and received faxes. The machine is factory-set to print an Activity report
after every 20 transactions. You can also disable automatic printing of this report, or print it
manually.
~
Note
For details on the Activity report setting, refer to "ACTIVITY REPORT" in "FAX SETTINGS" of the
User's Guide on-screen manual.
• Printing the Activity Report Manually
1
Press the
FAX
button, then press the
Menu
button.
2
Press the • or • button to select PRNT REPORT/LIST, then press the OK button.
3
Press the. or • button to select ACTIVITY REPORT, then press the OK button.
The Activity report is printed.
Faxing 57