Balancing The Machine - Stihl FS 94 Instruction Manual

English
Full Harness
3
2
Put on the full harness (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Balance the machine.
N
26

Balancing the Machine

The type and style of the harness and
1
carabiner (spring hook) depend on the
market.
Attaching machine to shoulder strap
1
2
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
Floating position
Mowing heads and grass cutting
N
blades should just touch the ground.
The correct floating position is obtained
as follows:
Balance the unit
2
Loosen the screw (3).
N
Move the carrying ring (2) up or
N
1
down the drive tube – tighten the
screw moderately – let the unit go
and wait until is its balanced – then
check the floating position.
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
Detaching machine from shoulder strap
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
3
2
1
1
2
2
STIHL FS 94 R