Fitting The Harness; Balancing The Machine - Stihl FS 130 Instruction Manual

English

Fitting the Harness

The type and style of the
harness/shoulder strap depend on the
market.
The use of the shoulder strap is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Shoulder Strap
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Balance the machine – see
N

"Balancing the Machine".

24
Full Harness
1
Put on the harness (1) and close the
N
locking plate (3).
Adjust the length of the strap – with
N
the machine attached, the
carabiner (2) must be about a
hand's width below your right hip.
Balance the machine – see
N
"Balancing the Machine".
Balancing the Machine
Attaching the unit to the harness
1
3
2
The type and style of the harness and
carabiner (spring hook) depend on the
market.
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
FS 130, FS 130 R