Other Menu - Furuno FM-8900S Installation Manual

4. INITIAL SETTINGS
4.2.4

OTHER menu

for SERVICE
P-BROWSER: Activate or deactivate the parameter browser, which is controlled from
a PC. For use by the service technician.
AMS MODE: AMS MODE selects whether an AMS (Alert Management System) is
connected to this radio or not. There are two choices, [LEGACY] and [DNV]. Select
[DNV] when this radio is connected to an AMS.
MULTI PORT: Select the equipment connected to the serial port. [AIS/AMS] (AIS tran-
sponder/AMS (Alert Management System)), [PLOTTER] (Navigational Plotter) or
[INS] (Integrated Navigation System).
ALARM UNIT: Select [CONNECT] if the Alarm Unit IC-350 is connected to the radio-
telephone.
PRINTER: Choose the printer model connected to the radiotelephone.
[TYPE-A]: PP-520
[TYPE-B]: PP-8800A
[OTHER]: Other printer
M-HS HOOK: Select where the main handset is connected. When the handset is not
connected to the transceiver unit, and this setting is [NORMAL] (default setting), the
system recognizes OFFHOOK state, preventing use of the remote station.
[NORMAL]: Select if the handset is connected to the transceiver unit.
[F(ON)]:The software forcibly sets ONHOOK state at the transceiver unit. Use this set-
ting if the handset is not connected to the transceiver unit; namely, the remote handset
is used always.
[F(OFF)]: The software forcibly sets OFFHOOK state.
for DEVELOP
The items in this column are for use by developers. Do not change the settings.
24