Restarting And Resetting; Water Resistance - Sony SGP321 User Manual

To remove a pairing with another device
1
From your Home screen, tap
2
Find and tap Settings > Xperia™ Connectivity > USB Connectivity.
3
Select the paired device that you want to remove.
4
Tap Forget.

Restarting and resetting

You can force your device to shut down in situations where it stops responding or
won't restart normally. No settings or personal data get deleted. You can also reset
your device to its original factory settings, with or without deleting all of your personal
data. This action is sometimes necessary if your device stops functioning properly.
Your device may fail to restart if the battery level is low. Connect your device to a charger and
try restarting again.
To force the device to shut down
1
Press and hold down both the volume up key and the power key for 10
seconds.
2
After the notification light flashes three times, release the keys. The device
turns off automatically.
To perform a factory data reset
To avoid permanent damage to your device, do not restart your device while a reset procedure
is underway.
1
Before you start, make sure to back up any important data that is saved on the
internal memory of your device to a memory card or other non-internal
memory.
2
From your Home screen, tap
3 Find and tap Settings > Backup & reset > Factory data reset.
4
To delete information, such as pictures and music, from your internal storage,
mark the Erase internal storage checkbox.
5 Tap Reset tablet.
6
If required, draw your screen unlock pattern, or enter your screen unlock
password or PIN to continue.
7 To confirm, tap Erase everything.
If you forget your screen unlock password, PIN or pattern in step 6, you can use the device
PC Companion or Sony™ Bridge for Mac applications to erase this
repair feature in the
security layer. By running the repair feature, you are reinstalling software for your device and
you may lose some personal data in the process.

Water resistance

In order for your device to be water resistant, the covers for the micro USB port, the
microSD card, the micro SIM card and the headset connector must be firmly closed.
Avoid exposing your device to environments with excessive dust or moisture. Normal
wear and tear along with damage to your device can reduce its ability to resist dust
or moisture. Do not use your device in the following conditions:
Ocean water
This is an Internet version of this publication. © Print only for private use.
.
.
Swimming pool
106
Diving