Multiple User Accounts - Sony SGP321 User Manual

1
Plug the charger into a power outlet.
2
Plug one end of the USB cable into the charger (or into the USB port of a
computer).
3
Plug the other end of the cable into the micro USB port on your device, with
the USB symbol facing up. The notification light illuminates when charging
begins.
4
When the device is fully charged, disconnect the cable from your device by
pulling it straight outwards. Make sure not to bend the connector.
If the battery is completely discharged, it may take a few minutes before the notification light
illuminates and the charging icon
Battery notification light status
Green The battery charge level is greater than 90%
Flashing red The battery is charging and the battery charge level is less than 15%
Orange The battery is charging and the battery charge level is less than 90%

Multiple user accounts

Your device supports multiple user accounts so that different users can log in
separately to the device and use it. For example, different users can have different
home screen setups, wallpaper and general settings, as well as separate memory
storage. So they can install their own applications and store files such as music and
photos that only they can access. Multiple user accounts work well in situations
where different family or group members share the same device.
The user who sets up the device for the first time becomes the owner of the device.
The owner is the administrator or primary user. Once you are logged in as the owner,
you can add, change and delete other users via the Settings menu. You can add a
maximum of seven new users. As the owner, your account cannot be deleted.
Some features are only available to the owner. For example, only the owner can access the
external SD card.
Using multiple user accounts
To add a new user
1
Make sure you are logged in as the owner, that is, the user who set up the
device for the first time.
2
From your Home screen, tap
3
Find and tap Settings > Users > Add user or profile > User.
4
Tap OK > Set up now. An icon representing the newly added user appears on
the lock screen.
5
Tap the icon representing the newly added user, then unlock the screen.
6
Follow the setup guide instructions to complete the procedure.
To switch users
1
From the lock screen, tap the icon representing the user that wants to use the
device.
2
If you have set a password for the new account, enter the password to log in. If
you have not set a password, just unlock the screen.
This is an Internet version of this publication. © Print only for private use.
appears.
.
10