Samsung MIM-E03*N User Manual page 54

Error codes
Display
475 OUTDOOR UNIT fan2 error
484 PFC Overload Error
485 Input current sensor error
500 IPM is overheated
554 Gas leak error
590 Inverter EEPROM Checksum error
601 Communication error between the CONTROL KIT and wired remote controller
602 Wired remote controller Master/Slave setting error
Communication tracking error between the CONTROL KIT and wired remote
604
controller
607 Communication error between the Master and Salve wired remote controllers
901 Water inlet (PHE) temperature sensor error(open/short)
902 Water outlet (PHE) temperature sensor error(open/short)
903 Water outlet (backup heater) temperature sensor error.
904 DHW tank temperature sensor error
906 Outdoor Eva Inlet Temp Sensor (open/short)
Flow switch and water pump error (F/S signal is OFF for 10 sec. during the
911
water pump signal is ON)
Flow switch and water pump error (Water pump signal is OFF for 60sec during
912
the F/S signal is ON)
916 Mixing valve temp sensor (open/short)
• When the product does not work during or after the concrete curing function and it displays "CC" on the wired
remote controller, contact the installer to cancel the concrete curing function.
NOTE
Explanation
ENGLISH-54
Error Source
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
Wired Remote
Controller
Wired Remote
Controller
CONTROL KIT,
Wired Remote
Controller
Wired Remote
Controller
OUTDOOR UNIT
OUTDOOR UNIT
CONTROL KIT
CONTROL KIT
OUTDOOR UNIT
CONTROL KIT
CONTROL KIT
CONTROL KIT