Optimizing Computer Signal Automatically; Adjusting The Image Using Auto Adjust; Turning Up Or Down Volume - NEC V300X User Manual

 Optimizing Computer Signal Automatically

Adjusting the Image Using Auto Adjust

This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• The Auto Adjust function will work for computer (RGB) signal only.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]
manually. (→ page 51, 52)

 Turning Up or Down Volume

TIP: When no menus appear, the
NOTE: The [BEEP] sound volume cannot be adjusted. To turn off the [BEEP] sound, from the menu, select [SETUP] → [OPTIONS
(1)] → [BEEP] → [OFF].
Downloaded From projector-manual.com NEC Manuals
and buttons on the projector cabinet work as a volume control.
3. Projecting an Image (Basic Operation)
＋
Sound level from the speaker can be adjusted.
Increase volume
Decrease volume
26