2. Installation and Connections
This section describes how to set up your projector and how to connect video and audio sources.
Your projector is simple to set up and use. But before you get started, you must first:
2
Setting Up the Screen and the Projector
Selecting a Location
chart below as a rough guide.
162.6(W) x 121.9(H) / 64(W) x 48(H)
121.9(W) x 91.4(H) / 48(W) x 36(H)
81.3(W) x 61.0(H) / 32(W) x 24(H)
61.0(W) x 45.7(H) / 24(W) x 18(H)
Lens center
NOTE:
• The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb.
• The Zoom lever adjusts the image size up to +/-5%
• For more details on throw distance, see next page.
Downloaded From projector-manual.com NEC Manuals
609.6(W) x 457.2(H) / 240(W) x 180(H)
487.7(W) x 365.8(H) / 192(W) x 144(H)
406.4(W) x 304.8(H) / 160(W) x 120(H)
365.8(W) x 274.3(H) / 144(W) x 108(H)
304.8(W) x 228.6(H) / 120(W) x 90(H)
243.8(W) x 182.9(H) / 96(W) x 72(H)
203.2(W) x 152.4(H) / 80(W) x 60(H)
1 0
8 0
"
6 0
"
4 0
"
3 0
"
1
3
To the wall outlet.
3 0
0 "
2 4
0 "
2 0
0 "
1 8
0 "
1 5
0 "
1 2
0 "
0 "
9
Set up a screen and the projector.
Connect your computer or video equip-
ment to the projector. See pages
14, 15,
1
.
Connect the supplied power cable. See
page 17.
NOTE: Ensure that the power cable and any other
cables are disconnected before moving the projec-
tor. When moving the projector or when it is not
in use, cover the lens with the lens cap.
1
,
1
,