Battery Installation
1
Press firmly and slide the battery
cover off.
Remote Control Precautions
Operating Range for Wireless Remote Control
Remote control
Remote control
the remote sensor on the projector cabinet.
on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.
Downloaded From projector-manual.com NEC Manuals
2
Install new batteries (AAA). Ensure
that you have the batteries' polarity
7 m/22 feet
30°
30°
Remote sensor on projector cabinet
30°
30°
7 m/22 feet
8
1. Introduction
3
Slip the cover back over the bat-
teries until it snaps into place. Do
not mix different types of batteries
or new and old batteries.