Saturn ST-VC 7296 Manual page 3

Therefore you must pull out a length of the cable and secure it before cutting off the plug
and refitting a new one.
IMPORTANT: The plug removed from the mains lead. If severed, must be destroyed
as a plug with a bared flexible cord is hazardous if engaged into a live socket outlet.
ILLUSTRATION
Features
1. Cable rewind button
2. On/off switch-button
3. Variable power switch
4. Air outlet
5. the front cover button
6. Hose inlet
7. Flexible hose
8. Hose handle
9. Airflow regulator
10. Plastic tube / metal telescopic tube
11. Floor brush
12. Tube storage clip
13. Multi purpose nozzles (crevice nozzle /upholstery nozzle)
Quick start
1. Assemble the nozzle, the tube and hose.
2. Pull out the mains cable to its full length and plug into the mains supply.
3. Switch on by pressing the On/off switch-button.
Downloaded From Vacuum-Manual.com Manuals
4
Accessories
Insert the flexible hose
Fit the hose to the cleaner by inserting the hose end into the hose inlet until it clicks to the
position.
TO remove the flexible hose
When removing, squeeze the clips both side and pull.
Fitting the tubes and accessories
1. Attach the tube to the handle end of the hose.
The hose handle features an airflow regulator which allows suction to be reduced as
required.
2. Attach the floor brush to the tube.
3. Attach the multi purpose nozzle to the tube.
Turn the rotating nozzle as the arrowhead show; it can be used as the upholstery nozzle
(for curtains and upholstery).
Turn the rotating nozzle backwards to the home position; it can be used as the crevice
nozzle (for awkward places, behind radiator; or for hard surfaces, pelmets, delicate
objects etc).
Controls
Power
The on/off control is operated by On/off switch-button.
Variable power
A Variable power switch 3 varies the suction power as required .For example, maximum
suction can be used for cleaning carpets, hard floors etc, and reduced suction for cleaning
upholstery and curtains.
Suction can also be controlled using the airflow regulator on the handle .Closed for
maximum suction, open for reduced suction.
Automatic cable rewind
After use, unplug and press the cable rewind button to retract the cable.
WARNING: When using the cable rewind, always hold the plug as the cable will rewind
quickly.
Dust disposal
The indicator is red when the dust is full, please clean the dust bag or replace it in time.
Take out the hose connector. Press the front cover button to open the front cover and take
out the dustbag .
Replace the dustbag
If paper dustbag is adopted. Please throw away and replace new one.
If textile filter is adopted, take down the dust bag, throw off the dust and fix it again.
Installing the dustbag
Insert the bag collar into the grooves of dustbag support.
5