Table of Contents
Advertisement
Guarantee restrictions
The shaving heads (cutters and guards) are not covered by the terms
of the international guarantee because they are subject to wear.
Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Center in your country.
Shaver
Problem
The appliance
does not work
when I press the
on/off button.
The appli-
ance does not
shave as well as
it used to.
Possible cause
The appliance is
still attached to the
wall socket. For
safety reasons, the
appliance can only
be used without
cord.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Solution
Unplug the appliance and
press the on/off button to
switch on the appliance.
Recharge the battery (see
'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
Replace the shaving heads
(see 'Replacement').
27
English
Advertisement
Table of Contents
