Pinch roller
November 2014
10. Remove a new alcohol pad from its packaging. Wipe the rubber
section of the pinch roller with the pad.
11. Rotate the roller to clean the entire surface.
12. Allow the alcohol to dry completely (about five minutes)
before you resume printing.
13. Carefully insert the cassette until it clicks into place.
14. Close the top door.
15. Close the front of the printer.
16. Install the exit tray and exit tray waste bin (see
Front Door Waste Bin, Exit Tray, and Exit Tray Waste Bin" on
page
2-2).
17. Move the power switch to the On ( | ) position.
Maintaining the Printer
"Installing the
3-9