Buttonholes With Cord - Singer 6180 Operation And Safety Notes

4. Lower the buttonhole lever (C ) so that it is posi-
tioned vertically between the two blocks (A)
and (B).
5. Mark the position of the buttonhole carefully
on your fabric.
6. Lay the fabric under the buttonhole foot. Draw
approx. 10 cm of the lower thread under the
fabric backwards.
7. Bring the marking on your fabric and the
marking on the buttonhole foot together and
lower the buttonhole foot.
8. Hold the upper thread lightly and start the
machine.
C
Marking fabric
The sewing program runs automatically ac-
cording to the following sequence.
59032_Naehmaschine_Singer_Content_DE_AT.indd 75
C D
A B
C C
Marking buttonhole foot
1 2
1 2
2
Alignment of the but-
1
tonhole foot
9. When you have finished sewing the button
hole, cut it open with the cutter. Ensure that you
do not damage the sewn buttonhole.

Buttonholes with cord

Hook filler cord (crochet thread or buttonhole twist)
to the notch of the presser foot, draw both threads
under the presser foot and knot them to the front
side as shown. Sew the buttonhole so that the zigzag
stitches cover the cord. When the buttonhole is sewn,
loosen the knots and trim both ends of the thread.
1
Cam
1
3 4 5 6 7
3 4 5 6 7 8
1
Marking on the
2
fabric
GB/IE
14.02.14 14:19
75