6.13. Remove the SC-Board
1. Remove the speaker box assy right. (See section 6.8.)
2. Remove the SU-Board and SD-Board. (See section 6.11.
and 6.12.)
3. Unlock the cable clampers to free the cable.
4. Disconnect the connectors (SC2 and SC20).
5. Remove the screws (×8
6.14. Remove the SS-Board
1. Disconnect the connectors (SS11, SS12, SS23, SS33 and
SS35).
2. Remove a short-jumper connector SS34 and re-use for new
SS-Board.
3. Disconnect the flexible cables (SS52, SS53, SS54, SS55,
SS56 and SS57).
4. Remove the screws (×6
) and remove the SC-Board.
) and remove the SS-Board.
6.15. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×4
each) and remove the stand brackets (left, right).
13
TH-42PZ700U