5. Remove the screws (×6
6. Remove the molding props (×11
7. Remove the P-Board.
Note:
When assembling the P-Board, the position of each hole of
the insulation sheets(A, B) is set to the position of each hole
of the P-Board and then assemble them. (
indicate setting positions.)
).
).
marks
6.8.
Remove the speaker box assy
(left, right)
1. Unlock the cable clampers to free the cable.
2. Disconnect the relay connectors.
3. Remove the screw (×1
assy (left, right).
11
TH-42PZ700U
) and remove the speaker box