Table of Contents
Advertisement
<A/D use IRQ> Test Screen
Assume single-ended, bipolar, gain=1
Use <PgUp> key to select the next channel
Use <PgDn> key to select the previous channel
Use <Up>/<Down> key to adjust C1
Use <Left>/<Right> key to adjust C2
The sample rate = The pacer timer rate = 2000/(C1*C2) K
Use <p> key to pause screen, use next <p> key to release screen
Use <ESC> to quit
The A/D mode control register=0x06
select pacer trigger and use interrupt transfer
One cycle samples 1000 A/D data points
Minimum, maximum and average values are shown on the screen
OME-A-822PGL/PGH Hardware Manual ---- 54
Advertisement
Table of Contents
