Diagnostic Utility; Introduction - Omega ISA- BUS MULTI-FUNCTIONAL BOARD OME-A822PG Hardware Manual

5. Diagnostic Utility

5.1 Introduction

The A82XDIAG.EXE diagnostic utility is a menu-driven program which allows
complete testing of the OME-A-822PGL/PGH board.
change to the subdirectory used in the installation process (C:\OME-A-822 for example).
Then type "A82XDIAG" <Enter> to start the application. These steps are shown
below:
C:\>CD A822<Enter>
C:\A822>CD DIAG <Enter>
C:\A822\DIAG>A82XDIAG <Enter>
A configuration
A82XDIAG.EXE program . The configu ration of the OME-A-822PGL/PGH board
is stored in this file. The stored information includes the board's I/O base address, interrupt
number and DMA channel. Changes are not automatically saved to the configuration file,
the user must select the save function to save any changes. When the
A82XDIAG.EXE utility starts, it will automatically check if the jumper setting of
the I/O base address matches the value stored in the configuration file. If the addresses do
not match, an error message will appear as shown below.
file, named OME-A-82X.CFG
OME-A-822PGL/PGH Hardware Manual ---- 44
To run the diagnostic utility,
is associated with the