Presetting The Stations Manually - Samsung DVD-V5450 User Manual

Press the ... or † button to select Auto Setup,
3
Press the OK button.
A message is displayed, indicating that any
channels already preset on your DVD-VCR will
be deleted.
4 Press the OK button to start the auto scanning.
The message Please Wait is displayed.
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically
to programme 1.
• If you wish to cancel the auto scanning before
the end, press the MENU button.
The number of stations automatically stored
by the DVD-VCR depends on the number
Note
of stations that it has found.
The time and date are set automatically
from the broadcast signal. If the signal is
weak or ghosting occurs, the time and date
may not be set automatically. In this case,
they should be set manually (refer to page
18).
Once the auto scanning procedure has
finished, some stations may have been
stored more than once; select the stations
with the best reception and delete the ones
no longer required (refer to page 22).
20 - English
Downloaded From Disc-Player.com Samsung Manuals
Auto Setup
Your data will be lost
Press OK to continue
MENU to exit
OK
RETURN MENU
Auto Setup
Please Wait
10%
√ √
RETURN MENU
Presetting the Stations
Manually
You do not need to preset the stations manually if
you have already set them automatically.
Press the MENU button, then press the OK or
1
√ button.
Language
SETUP
Clock
DVD
Install
User Set
VCR
Auto Power Off
PROG
Screen Messages : On
FUNC
OK
Press the ... or † button to select Install, then
2
press the OK or √ button.
The Install menu is displayed.
Auto Setup
SETUP
Manual Setup
DVD
VCR Output CH
VCR
PROG
FUNC
OK
Press the ... or † button to select Manual
3
Setup, then press the OK or √ button.
The TV STATION TABLE menu is displayed.
❉ ❉ TV STATION TABLE ❉ ❉
PR CH
1
2
3
4
5
... ... † † √ √
DELETE : CLEAR
Setup
√ √
: English
√ √
√ √
√ √
√ √
: Off
√ √
RETURN MENU
Install
√ √
√ √
√ √
:CH60
RETURN MENU
NAME
SWAPPING : OK
RETURN