Printer Installation; Printer Installation Site; Installing The Ink Ribbon - Olympus CAMEDIA P-440 Reference Manual

Printer Installation

Printer Installation Site

Provide a location for installing the printer
that is flat and stable and ensures adequate
installation space. Install the printer in a
location that is able to withstand weight of
approximately 15 kg (30 lbs).

Installing the Ink Ribbon

Caution
• P-400 ink ribbon P-RBN cannot be used in this printer for printing.
1
Tear off the center strip on the back of the
ink ribbon package along the tear line
shown.
2
Open one of the flaps.
Caution
• When cutting open the cover sheet and tearing back the flaps, do not remove the flaps completely
from the package. Removal of the flaps will prevent you from determining the installation direction
of the ink cassette (ribbon holder).
Provide enough space in front of the
printer so that the paper output tray
can be pulled out.
9
When actually installing the
printer, allow enough room
around the printer so that it is at
least 10 cm (4˝) away from the
wall.