Loading The Ribbon Cartridge; About The Paper-In Tray And The Ribbon Cartridge; Setting The Ribbon Cartridge - Olympus P-S100 User Manual

Doya_E.book Page 19 Thursday, November 11, 2004 10:50 AM

Loading the ribbon cartridge

About the paper-in tray and the ribbon cartridge

For printing, a paper-in tray and a ribbon cartridge are required (both supplied, as well as commercially
available as replacements).
For details, refer to "About the Paper-in Tray/Ribbon Cartridge" (gpage 38).
Notes
• Do not mix ribbon cartridges and paper-in trays that are packaged together.
• Do not use paper that has already been printed on or ejected.

Setting the ribbon cartridge

1
Open the ribbon cartridge door.
2
Remove slack from the ribbon.
Turn the roll in the direction indicated by the arrow while holding the roller in place.
If the ribbon cartridge has been used before, take in any ribbon slack before loading.
Loading the ribbon cartridge
EN-19