Live Screen Configuration - Samsung XRN-2010 User Manual

Shutting Down the System
1. In the live screen menu, select <Shutdown>.
2. The "Shutdown" confirmation pop-up window will appear.
3. Click on <OK>.
The system will shut down.
`
M Only the user with the "shutdown" permission can shut down
the system.
`
For the permission management, refer to "User > Setting
Permissions". (Page 27)
Login
To use the NVR menu, you are required to login as a user that is authorized to access the applicable menu.
1. Right click with your mouse button on the live mode screen.
You will see the context menu on the screen as shown.
2. Select <Login>.
The login dialog appears.
`
J The initial administrator ID is set to "admin" and you will need to
configure the password in the installation wizard.
`
Please change your password every three months to safely protect
personal information and to prevent the damage of the information
theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
`
M For the restricted permission, refer to "User > Setting Permissions". (Page 27)

LIVE SCREEN CONFIGURATION

Icons on the Live Screen
You can check the status or operation of the NVR with the icons on the live screen.
FULL NO RAID RAID SCSI
CAM 01
Name
Current Date, Time Displays the current time and date.
Login Information When you are logged in, the "LOG ON" icon will be displayed.
It is displayed when there is ongoing backup in the live condition.
If access to the recording canceling menu is restricted, then it is only displayed when
there is ongoing manual recording.
`
Only a user with the right to cancel recording can do so.
Screen Mode
It is displayed when the magnifying function is in operation.
This icon is displayed when you press the Freeze button.
It is displayed when all the channels are switched at the set time interval.
It is displayed when there is a problem with the fan.
It is displayed when the recording data cannot be received properly due to a device
problem.
System
Displayed if the HDD is full and the NVR has an insufficient space to record.
Operation FULL
Displayed if no HDD is installed or the existing HDD should be replaced.
NO
Displayed if the HDD needs a technical examination.
2016-01-01 00 : 00 : 01
Description
English _15