Changing The Recording Scene [Rec Scene] - Olympus WS 700M Detailed Instructions

Listening while audio is recorded
If you start recording after inserting the
earphone into the EAR jack on the recorder,
you can hear the sound being recorded. The
recording monitor volume can be adjusted
by pressing the + or − button.
Connect the earphone to the EAR
jack on the recorder.
• After recording has started, you can hear
the sound being recorded through the
earphone.
To EAR jack
Notes
• Recording level cannot be controlled
using the volume button.
• When using the earphones, do NOT set
the volume too high. Listening at very
high volume may lead to hearing loss.
• Do not place earphones near a
microphone as this may cause feedback.
• When the external speaker is connected
while recording, there is a risk that audio
feedback will occur.
Changing the recording scene
[Rec Scene]
You can easily change the recording settings
by selecting the scene which best matches
your usage (☞ P.47, P.52).
1 While the recorder is during
stop mode, press and hold the
SCENE/INDEX button.
2 Press the + or − button to select
[Rec Scene].
OK `/MENU
3 Press the
4 Press the + or − button to select
the recording scene.
OK `/MENU
5 Press the
Recording
+−
button
OK `/MENU
button
SCENE/INDEX
button
button.
button.
EN
27
2