Setting Time/Date (Time&Date) - Olympus WS-300M Instructions Manual

Setting Time/Date (Time&Date)
If you set the date and time beforehand, the information when the file is recorded is automatically
1
stored for each file. Setting the date and time beforehand enables easier file management.
The hour indicator will flash automatically when you load a battery
before using the recorder for the first time, or after the recorder
hasn't been used for a long time. Proceed from step 1.
2
12
Press the 9 or 0 button to
1
1
select the item to set.
Select the item from "hour", "minute", "year"
"month" and "day" with a flashing point.
2
Press the
Follow the same steps by pressing the 9
or 0 button to select the next item, and
press the + or – button to set.
3
Press the OK button to complete
the setup screen.
3
The clock will start from the set date and
time. Press the OK button according to the
time signal.
• You can choose between 12 and 24 hour
display by pressing the FOLDER/INDEX
button while setting the hour and minute.
Example: 5:45 P.M.
(Initial setting)
+
–
or button to set.
5:45 PM ← → 17:45