Olympus WS-300M Instructions Manual page 23

To MIC
(microphone)
jack
To audio input
terminal of other
devices
......................................................................................................................................................
Notes
• The input level cannot be adjusted on this recorder. When you connect the recorder to an external device,
execute a test recording and adjust the output level of the external device.
• A microphone with plug-in power, which receives the power supply from this recorder, can be used.
• Please do not insert/remove the cord to/from the jack of this recorder while recording.
• When the external stereo microphone is inserted while set in HQ, SP, and LP modes, it enables recording
only with the L channel microphone.
• When the monaural microphone is inserted into the microphone jack in ST HQ mode, the sound will be
recorded only in the L channel.
Recording the Sound of Other
Devices with This Recorder
To audio output
terminal of other
devices
The sound can be recorded when connecting to the audio
output terminal (earphone jack) of the other device, and
the microphone jack of the recorder with the connecting
cord (optional KA333)( P.84) for dubbing.
Recording the Sound of This
Recorder with Other Devices
To EAR
The sound of this recorder can be recorded to other
(earphone) jack
devices when connected to the audio input terminal
(microphone jack) of other devices and the earphone
jack of this recorder, with the connecting cord (optional
KA333) for dubbing.
2
23