Tm (Id) Sensor; Before Replacing The Tm(Id) Sensor - Ricoh MET-C1 Field Service Manual

4. Replacement and Adjustment
2. Fusing entrance sensor unit [A] ( ×1,
3. Fusing entrance sensor [A]

TM (ID) Sensor

Before Replacing the TM(ID) sensor

Each sensor assembly has a list of characteristic values attached to it. Before you replacing the TM / ID
sensor, you must do the following procedure, or process control/MUSIC will not be done correctly after
power is switched on (it will use the values for the old sensor).
308
×1)