Using The Hold Switch; Setting The Hold Function Of The Device To On - Olympus m:robe MR-100 User Manual

Using the HOLD switch

Using the HOLD switch
– HOLD function
This is used to prevent unintentional operations when carrying your m:robe in a pocket or a bag.

Setting the HOLD function of the device to ON

Slide the HOLD switch to follow the direction of the arrow on your m:robe.
The display disappears and the touch panel becomes inactive.
When the HOLD status is ON, "
(g page 33).
To set HOLD to OFF
To operate the m:robe again, slide the HOLD switch in the reverse direction of the arrow.
" " disappears on the display.
EN-28
ON
" is displayed on the display. Refer to "PLAYBACK display"