Starting Transfer; Disconnecting Your M:robe From Your Pc - Olympus m:robe MR-100 User Manual

Transferring music from your PC to your m:robe

Starting transfer

After you connect your m:robe to your PC, the Music/Photo Organization Software "m:trip" automatically
runs.
To start transferring, click the [Sync] button in the bottom right of your m:trip screen. Then, click [Start] in the
display that pops up to begin transfer.
During transfer, the display below appears on your m:robe.
When the transfer is complete, the transfer indicator stops on the screen.
Tip
You can set m:trip so that transfer is not started automatically. For details, refer to the m:trip online Help.

Disconnecting your m:robe from your PC

1
Click the [Remove m:robe] button on the m:trip screen.
2
Take your m:robe out of the cradle.
When connecting your m:robe directly to your PC, disconnect the dedicated USB cable from your
m:robe.
EN-24
CONNECT
DO NOT DISCONNECT!