Canon PIXMA mp800 User Manual page 60

(C) Mark this to print all photographs, one copy each.
*When you mark this, even if you mark the number of copies you want to print for each
photograph, those marks will be disregarded, and one copy each of all photographs will be
printed.
(D) Select the number of copies (fill in a circle under each photograph you want to print).
(E) Follow the procedure as described.
(F) Select the paper source.
(G) Mark this to print the same Photo Index Sheet again.
*If you mark this, all other marked settings will be disregarded.
5
Fill in the appropriate circles in the Photo Index Sheet.
Fill in the appropriate circles (0) with a dark pencil or a black ink pen to select the photos to
print and their print options.
• Good
•
• Bad
~
(A)
(A) Check mark
(B) Line only
(C) Too light
EJ
(8) (e)
A
Important
W
Note
• Be sure to fill a circle for every setting item (except options).
• If there is more than one Photo Index Sheet, fill in all the sheets.
• If the filled circles on the Photo Index Sheet are not dark enough, the
machine may not read the settings.
6
Scan the Photo Index Sheet and print photos.
(1) Load the paper you selected for the Photo Index Sheet.
See "Loading Paper" on page 19.
• When printing images using the Photo Index Sheet, you can select 4"
x 6" (101.6 x 152.4 mm), 5" x 7" (127 x 177.8 mm), 8.5" x 11"
(LETTER), or A4 for the page size.
• Load paper in the location you selected under <The Paper Feeder> on
the Photo Index Sheet.
(2) Press [Photo Index Sheet].
(3) Use [.... ] or [.....] to select <Scan sheet and print>, then press [OK].
(4) Place the Photo Index Sheet face-down on the Platen Glass, then press [OK].
When placing the Photo Index Sheet, place the front side down, and align the upper left
corner of the sheet precisely with the arrow mark (alignment mark) at the upper left
corner of the Platen Glass.
The Photo Index Sheet is scanned and the specified photos will be printed.
58 Printing from a Memory Card
Chapter 3