When Copying - Canon PIXMA mp800 User Manual

Check the size of the print data. For Windows XP and Windows 2000, if the
size of the data is too large, part of it may be lost. When the spool format is
The size of the print data is too large. EMF, follow the procedure below.
1. Open the printer properties dialog box.
2. On the [Page Setup] tab, click [Print Options].
3. Select the [Reduce spool data size] check box, and click [OK].
W
Note
When Reduce spool data size is set, the print quality may be degraded.
Performing automatic duplex
printing
• When Copying
Select [Use reduced printing] in the printer driver. It may solve the
problem.
1. Open the printer properties dialog box.
2. Click [Print Area Setup] in the [Page Setup] tab and select [Use reduced
printing].
1. In the [Print] dialog box, select [Duplex Printing & Margin] from the pop-
up menu.
2. Select [Automatic Duplex Printing], and select [Use reduced printing] in
Print Area.
Cause
Action
The document is not loaded Check that the document is loaded correctly on the Platen Glass.
correctly.
See "Loading Documents" on page 18.
The quality (print quality) displayed Set the image quality suitable for the document.
on the LCD is not suitable for the
See "Copying" on page 37.
document.
The document is not loaded with the
When loading the document on the Platen Glass, the side to be copied
side to be copied face down. should be face down.
The document or photograph set on Image quality may be poor if you copy a printed document or photograph.
the Platen Glass was printed from
Instead, reprint the photograph directly from the digital camera, or the
your machine. document from your computer.
The Platen Glass or FAU Protective
Clean the Platen Glass or FAU Protective Sheet.
Sheet is dirty.
See "Cleaning the Platen Glass and Document Cover" on page 107.
120 Troubleshooting
Chapter 12