TRENDnet User's Guide
SNMP Setting
SNMP Setting allows you to assign the contact details, location,
community name, and trap settings for SNMP. This is a networking
management protocol used to monitor network-attached devices. SNMP
allows messages (called protocol data units) to be sent to various parts of
a network. Upon receiving these messages, SNMP-compatible devices
(called agents) return data stored in their Management Information Bases.
SNMP Active: Choose to enable or disable the SNMP
feature.
SNMP Version: Select SNMP version from the drop- down
list.
SNMP Manager
Specify the SNMP manager IP address.
IP:
Read
Specify the password to access the SNMP
Community
community for read only access.
Name:
© Copyright 2015 TRENDnet. All Rights Reserved.
Set Community
Specify the password for access to the
Name:
SNMP community with read/write access.
System
Specify the location of the TEW-735AP.
Location:
System
Specify the contact details of the TEW-
Contact:
735AP.
Trap Active: Choose to enable or disable the SNMP
trapping feature.
Trap Manager
Specify the IP address of the SNMP trap
IP:
community.
Trap
Specify the name of SNMP trap community.
Community:
Apply: Click this button to save and activate
Cancel: Click this button to abandon the change
TEW-735AP
33