After Use - Panasonic MK-F800 Operating Instructions Manual

AFTER USE

Cleaning
Pre-wash
The pre-wash enables easier cleaning. It can be used for: Knife Blade, Kneading Blade, Whipping Blade, and the
Blender Unit. To pre-wash, simply follow the steps below.
1 Food Processor
Put the used attachment inside the Bowl, fill the Bowl
with water until the attachment is submerged in water
(max. 500 mL). Place the Bowl Lid on top of the Bowl
and turn it clockwise until a 'click' sound is heard.
2
Food Processor: Select the Intermittent mode, push the
ON/OFF Switch and operate for 10 ~ 20 seconds at level
10.
Blender: Select the Continuous mode, push the ON/OFF
Switch and operate for 10 ~ 20 seconds at level 10.
Wash these items by rinsing them under running water. Use neutral kitchen detergent if necessary. Proceed to
wipe them dry with a clean cloth.
Wash these items by rinsing them under running water, and clean carefully with Brush.
Use neutral kitchen detergent if necessary.
Note:
• These items are extremely sharp and should be handled with extra care while cleaning.
Avoid hitting these items on hard objects during the cleaning process.
• The Mill Container Base must not be washed, use Brush to clean.
Blender
2
1
For the Blender Unit, fill 500mL of water into the Blender
Jug and cover with the Blender Lid. Plug-in the plug into
the socket and turn on the Power Switch.
3
Push the ON/OFF Switch to stop the driving operation.
Switch off the Power Switch and unplug from the socket.
Remove the attachments and proceed for cleaning.
26
1
2
2
1