FOOD PROCESSOR
Ingredient Preparations for Salad Drainer
Function
Ingredient
Mode
Lettuce
Leaves
Drainer
Auto
Cabbage
Operating with Auto Menu
1
1
2
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3
Each Auto Menu has a pre-programmed driving time.
Each lighted bar represents 10 seconds of driving time.
Push the ON/OFF Switch to start the operation.During
operation, the Driving Time L.E.D. will turn off one by
one after every 10 second intervals until the set duration
is completed and 4 beep sounds will be heard. The
Mode Indication L.E.D.s will light up and blink.
Note:
• Maximum working capacity of the Salad Drainer: 200 g or till maximum height of Salad Drainer, whichever
comes first.
• Prohibited ingredients: large, chunky ingredients (such as whole tomatoes, large carrot chunks, and etc.)
• Ensure that the ingredients are spread evenly around the Salad Drainer before processing.
• Do not operate the Salad Drainer in Continuous Mode.
• Always ensure that the Drainer Cover is attached onto the Salad Drainer before operation, otherwise the
ingredients might come out and tear around the Bowl.
• Depending on the amount of ingredients used, there will be significant vibrations present. In that
case, hold down the Bowl Lid with both hands to support it during its operation.
-SALAD DRAINER-
Max
Operating Time (approx.)
Single Use
100 g
20 ~ 40 sec
Initial setting is for 50 g (20 sec)
200 g
20 ~ 50 sec
2
Select the Drainer mode. The selected Mode Indication
L.E.D. will light up and a beep sound will be heard. The
Driving Time and ON/OFF Switch Indication L.E.D. will
light up and blink.
4
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Salad
Drainer from the Bowl.
20
Preparation Method
Cut into 3 ~ 5 cm slices.
Shredded into 1 ~ 3 mm.
2
3
1