Tanita BC-G02 Manual page 16

en
Note:
• The diet mode for females assumes that the person has a menstrual cycle that is within the normal range.
(The normal menstrual cycle range is between 25 - 38 days, and the variation between the number of
days per cycle is within 6 days.) Users who have different menstrual cycles should use this information
for reference only.
• This device does not actually measure the menstrual cycle.
• The Diet lamp does not light if the menstruation starting date is not entered every month.
• The following screen is displayed if the menstruation starting date is set as
a future date by mistake.
• The following screen is displayed if 99 or more days have passed since
last menstrual starting date.
Registering the Menstruation Starting Date Every Month
When registering personal data, enable the diet mode for females and enter the most recent menstruation
starting date. (P.10) Enter the menstruation starting date every month to ensure accurate notification of
the effective diet period.
Check that the display has gone off and press the Down button.
Press the Up or Down button to select your own registration number.
Press the SET/M button to enter.
Press the DIET button.
When the screen on the right is displayed, use the Up or Down button to
select the previous menstruation starting date.
Press the SET button to enter.
This completes the registration, and the power turns off automatically.
Note: If the diet mode for females is enabled but the menstruation starting date
has not been registered for a while, the following screen is displayed after
the measurement results.
Also, the " " flashes while the measurement results screen is
being displayed.
16