Operation - Uniden SSE 30 Owner's Manual

Operation

Answer a Call
When there is an incoming call, the phone rings and the ringer LED
flashes. Pick up the handset to answer the call. After talking, hang up the
handset or press RESET to end the call.
Boost and Volume Control
The BOOST button helps you control the volume of the receiver. During a
conversation, press the BOOST button (the ringer LED will glow) and then
rotate the Volume Control to adjust the volume according to your liking.
Last Number Redial
Pick up the handset and press REDIAL, the phone will automatically dial
out the last dialed number.
Mute
During a call, press and hold MUTE to mute the microphone.
Flash
Call Waiting is a service that is available from your telephone service
provider. If you have opted for this service from your provider, then press
FLASH and 2 to put the first caller on hold and accept the waiting call. To
return to the original caller, press FLASH and 2 again.
Ringer
Slide the Ringer switch to OFF, to mute the ringer, which means that
the phone will not ring for any calls. However, the ringer LED will flash,
indicating an incoming call.
5